江西临川地区相山铀矿田构造应力场分析   总被引：7，自引：0，他引：7  

陈正乐  杨农  王平安  宫红良  韩凤彬  周永贵  邵飞  唐湘生  徐金山  喻建发 《地质通报》2011,30(4):514-531

相山铀矿田是中国最大的、与火成岩有关的中低温热液型矿床,断裂构造控矿特征明显。目前该矿床的后备资源出现危机,因此开展矿田构造研究,为深部及其外围找矿提供科学指导迫在眉睫。在野外观测分析和节理、擦痕实地测量的基础上,利用构造解析法、共轭剪节理分析法、断层擦痕反演模拟法及X光岩组法等,通过吴氏网投图分析和计算机的反演计算,确定了相山铀矿田多期次构造活动的变形特征及其主应力方向;并根据构造变形叠加关系及其成岩时代的确定,推断了应力作用的期次和时代。为此,将相山铀矿田的构造应力场划分为3期6个阶段,包括：成矿前的基底变形和早期火山活动阶段,早期矿化蚀变和第一、第二主成矿阶段,及其成矿期后阶段,矿体局部被错断;并深入分析了不同阶段构造活动及其铀成矿特征,探讨了区域构造应力场的演变与铀成矿作用关系,认为两者具有一致性特征,进而指出了区域富大矿体产出的有利构造部位。  相似文献   

胶东大磨曲家金矿床岩石磁组构、构造变形与金矿化     

江少卿  郝梓国  高帮飞  周应华 《地质通报》2011,30(9):1418-1428

在胶东地区招远-平度断裂带上的大磨曲家金矿区选取了典型的构造区域进行岩石磁组构研究。沿着断裂带在不同构造部位的36个采样点钻取了112个定向岩心样品,所有样品均沿勘探线布置。磁组构研究显示,研究区以弱磁性岩石为主,总体上,胶东群变质岩的磁化率值较高,而玲珑黑云母花岗岩的磁化率值较低,尤以碎裂程度高的强蚀变岩的磁化率值最低;磁化率各向异性方位主要为NE向挤压,磁组构所指示的构造应力场与大磨曲家矿区的区域挤压应力方向是相同的;对具不同程度矿化的81线的Au含量与80线磁组构各向异性度(P值)进行对比研究发现,P值与金品位呈负相关关系;弱矿化糜棱岩中的金矿化在磁面理发育的岩石中较为发育,成矿晚期,Au元素含量随着岩石磁性的减弱而增加,特别是在强应变后弛豫阶段矿液充填于相对张性的石英脉中Au含量最高。  相似文献   

渭北煤田合阳县北中深部控煤构造样式分析     

王辉 《中国煤炭地质》2011,(10):8-13,28

依据野外地表地质观测及地震、钻探最新的深部地质资料,结合对区域控煤构造认识,运用构造解析、构造应力场及地质力学分析等研究思路与方法,讨论了研究区控煤构造特征、构造样式以及成因。研究结果表明：研究区共有三类六种控煤构造样式,即挤压构造样式（宽缓褶皱、叠加褶皱）、走滑构造样式（反＂S＂型褶皱、＂入＂字型构造）及伸展构造样式（掀斜断块、堑垒构造）,其中以伸展构造样式发育为主要特征;研究区由东南向西北,构造变形强度由强变弱,先后经历了印支期南北向挤压、燕山中期北西向挤压和喜马拉雅期北东向挤压-走滑与北西-南东向伸展断陷作用;晚期形成的正断层不仅破坏了煤层的连续性,而且成为奥灰水储集和运移的主要通道,增大了底板突水的可能性,使煤炭资源开发受到影响。  相似文献   

http://www.sciencedirect.com/science/article/pii/S1674987111000594     

Victor D. Mats  Tatiana I. Perepelova 《地学前缘(英文版)》2011,2(3):349-365

A new model is suggested for the history of the Baikal Rift,in deviation from the classic two-stage evolution scenario,based on a synthesis of the available data from the Baikal Basin and revised correlation between tectonic-lithological-stratigraphic complexes(TLSC) in sedimentary sections around Lake Baikal and seismic stratigraphic sequences(SSS) in the lake sediments.Unlike the previous models,the revised model places the onset of rifting during Late Cretaceous and comprises three major stages which are subdivided into several substages.The stages and the substages are separated by events of tectonic activity and stress reversal when additional compression produced folds and shear structures.The events that mark the stage boundaries show up as gaps,unconformities,and deformation features in the deposition patterns. The earliest Late Cretaceous-Oligocene stage began long before the India-Eurasia collision in a setting of diffuse extension that acted over a large territory of Asia.The NW-SE far-field pure extension produced an NE-striking half-graben oriented along an old zone of weakness at the edge of the Siberian craton.That was already the onset of rift evolution recorded in weathered lacustrine deposits on the Baikal shore and in a wedge-shaped acoustically transparent seismic unit in the lake sediments.The second stage spanning Late Oligocene-Early Pliocene time began with a stress change when the effect from the Eocene India-Eurasia collision had reached the region and became a major control of its geodynamics.The EW and NE transpression and shear from the collisional front transformed the Late Cretaceous half-graben into a U-shaped one which accumulated a deformed layered sequence of sediments.Rifting at the latest stage was driven by extension from a local source associated with hot mantle material rising to the base of the rifted crust.The asthenospheric upwarp first induced the growth of the Baikal dome and the related change from finer to coarser molasse deposition.With time,the upwarp became a more powerful stress source than the collision,and the stress vector returned to the previous NW-SE extension that changed the rift geometry back to a half-graben. The layered Late Pliocene-Quaternary subaerial tectonic-lithological-stratigraphic and the Quaternary submarine seismic stratigraphic units filling the latest half-graben remained almost undeformed.The rifting mechanisms were thus passive during two earlier stages and active during the third stage. The three-stage model of the rift history does not rule out the previous division into two major stages but rather extends its limits back into time as far as the Maastrichtian.Our model is consistent with geological, stratigraphic,structural,and geophysical data and provides further insights into the understanding of rifting in the Baikal region in particular and continental rifting in general.  相似文献   

http://www.sciencedirect.com/science/article/pii/S1674987111000429   总被引：1，自引：0，他引：1  

Xieyan Song  Yushan Wang  Liemeng Chen 《地学前缘(英文版)》2011,2(3):375-384

The three most crucial factors for the formation of large and super-large magmatic sulfide deposits are: (1) a large volume of mantle-derived mafic-ultramafic magmas that participated in the formation of the deposits; (2) fractional crystallization and crustal contamination, particularly the input of sulfur from crustal rocks, resulting in sulfide immiscibility and segregation; and (3) the timing of sulfide concentration in the intrusion. The super-large magmatic Ni-Cu sulfide deposits around the world have been found in small mafic-ultramafic intrusions, except for the Sudbury deposit. Studies in the past decade indicated that the intrusions hosting large and super-large magmatic sulfide deposits occur in magma conduits, such as those in China, including Jinchuan (Gansu), Yangliuping (Sichuan), Kalatongke (Xinjiang), and Hongqiling (Jilin). Magma conduits as open magma systems provide a perfect environment for extensive concentration of immiscible sulfide melts, which have been found to occur along deep regional faults. The origin of many mantle-derived magmas is closely associated with mantle plumes, intracontinental rifts, or post-collisional extension. Although it has been confirmed that sulfide immiscibility results from crustal contamination, grades of sulfide ores are also related to the nature of the parental magmas, the ratio between silicate magma and immiscible sulfide melt, the reaction between the sulfide melts and newly injected silicate magmas, and fractionation of the sulfide melt. The field relationships of the ore-bearing intrusion and the sulfide ore body are controlled by the geological features of the wall rocks. In this paper, we attempt to demonstrate the general characteristics, formation mechanism,tectonic settings, and indicators of magmatic sulfide deposits occurring in magmatic conduits which would provide guidelines for further exploration.  相似文献   

http://www.sciencedirect.com/science/article/pii/S1674987111000788     

Minghui Ju  Jianwen Yang 《地学前缘(英文版)》2011,2(4):577-582

This paper presents numerical investigation on the ore-forming fluid migration driven by tectonic deformation and thermally-induced buoyancy force in the Chanziping ore district in South China. A series of numerical scenarios are considered to examine the effect of meteoric water precipitation, the dip angle of the faults, unconformity surface, and thermal input on the ore genesis. Our computations reveal that the downward basinal fluid flow driven by extensional stress mixes with the upward basal fluid driven by the thermal input from depth at the junction of two faults at a temperature of about 200 C, triggering the precipitation of the Chanziping uranium deposit.  相似文献   

冬季寒潮期间黄、渤海水位低频波动研究          下载免费PDF全文

李晓红  董礼先 《海洋与湖沼》2011,42(4):467-473

利用 POM(Princeton Ocean Model)海洋数值模式建立渤、黄、东海冬季三维环流动力学区域模型。模型在海-气边界使用包括风应力、气压和热通量的大气驱动, 海洋边界使用西太平洋模式提供的环流和潮位驱动, 综合模拟潮波运动、温度、盐度、环流变化和水位低频波动。 模拟了 2001 年 1 月寒潮过境时黄、 渤海水位低频波动及流场变化, 分析了其对大风过程、 气压、降温的响应, 发现冬季强劲的北风和西北风都可以通过抽吸振荡在渤、 黄海诱发水位的低频波动, 东北风则由于地形影响不能诱发渤、黄海的低频波动。气压和降温只是在波动幅度上有一定的影响。波动发源于渤海和北黄海, 最大波幅可以达到 0.6 m。波动进入南黄海后有沿黄海深槽西侧传播的倾向, 波动幅度在传播过程中逐渐减小。  相似文献   

Geological comparative studies of Japan Arc System and Kyushu-Palau Arc   总被引：5，自引：3，他引：2  

YAN Quanshu  SHI Xuefa 《海洋学报(英文版)》2011,30(4):107-121

Based on the published data of structure geology,geochronology,petrology and isotope geochemistry,the authors of this paper have conducted studies on the tectonic evolution history of Japan arc system and Kyushu-Palau ridge(KPR) . The studies show that the initial Japan arc system was resulted from the subduction of ancient Pacific plate beneath Eurasian Plate in Permian. It was part of an Andean-type continental volcanic arc which occurred in the offshore in the east of Asian during late Mesozoic era. The formation of tertiary back-arc basin(Japan Sea) resulted in the fundamental tectonic framework of the present arc system. Since Quaternary the system has been lying at E-W compression tectonic setting due to the eastward subduction of Amur Plate. It is expected that Japan arc system will be juxtaposed with Asian continent,which is similar to the present Taiwan arc system. The origin of Philippine Sea Plate(PSP) is still in debate. Some studies argued that it is a trapped oceanic crust segment,while the others insisted that it is a back-arc basin accompanied with ancient IBM arc. However,it is all agreed that the tectonic evolution of PSP started since 50 Ma,i.e.,PSP has drifted from the site around equator at 50 Ma to the present site,and the subduction of PSP along Nankai trough-Ryukyu Trench beneath the Japan arc system during 6-2 Ma led to the formation of the present Ryukyu arc system. Of the PSP,the KPR has been found with the oldest rocks formed at 38 Ma. Combining with its geochemical characteristics of oceanic arc tholeiite,it is suggested that KPR is an intraoceanic volcanic arc,more specifically,a relic arc(i.e.,rear arc of the ancient IBM) after rifting of ancient IBM. In addition,Amami-Daito province is of arc tectonic affinity,but has been affected by mantle plume. Therefore,based on their respective tectonic evolution history and geochemical characteristics of rock samples,it is inferred that there is no genetic relationship between Japan arc system and KPR. It is noted that rocks reflecting continental crust basement feature have been collected on the northern tip of KPR,which may be related to the process of KPR accreting on Japan arc,but the arc-continent accretion process are still at initial stage of modern continental crust accretion model. However,due to the scarcity of data of the northern tip of KPR,crustal structure of this location and its adjacent Nankai trough need to be further constrained by geophysical studies in the future.  相似文献   

The effect of wave-induced radiation stress on storm surge during Typhoon Saomai (2006)   总被引：5，自引：1，他引：4  

FENG Xingru  YIN Baoshu  YANG Dezhou  WILLIAM Perrie 《海洋学报(英文版)》2011,30(3):20-26

The effects of wave-induced radiation stress on storm surge were simulated during Typhoon Saomai using a wave-current coupled model based on ROMS (Regional Ocean Modeling System) ocean model and SWAN (Simulating Waves Nearshore) wave model.The results show that radiation stress can cause both set-up and set-down in the storm surge.Wave-induced set-up near the coast can be explained by decreasing significant wave heights as the waves propagate shoreward in an approximately uniform direction;wave-induced set-down far from the coast can be explained by the waves propagating in an approximately uniform direction with increasing significant wave heights.The shoreward radiation stress is the essential reason for the wave-induced set-up along the coast.The occurrence of set-down can be also explained by the divergence of the radiation stress.The maximum wave-induced set-up occurs on the right side of the Typhoon path,whereas the maximum wave induced set-down occurs on the left side.  相似文献   

Neogene-Quaternary tectonic evolution of the Leeward Antilles islands (Aruba, Bonaire, Curaçao) from fault kinematic analysis     

Jean-Claude Hippolyte  Paul Mann 《Marine and Petroleum Geology》2011,28(1):259-277

Aruba, Bonaire, and Curaçao are islands aligned along the crest of a 200-km-long segment of the east-west-trending Leeward Antilles ridge within the broad Caribbean-South America plate boundary zone presently characterized by east-west, right-lateral strike-slip motion. The crust of the Leeward Antilles ridge represents the western segment of the Cretaceous-early Cenozoic Great Arc of the Caribbean, which obliquely collided, with the continental margin of northern South America in early Cenozoic time. Following the collision, the ridge was affected by folding and was segmented by oblique, northwest-striking normal faults that have produced steep-sided, northwest-trending, elongate islands and narrow shelves separated by deepwater, sediment-filled and fault-controlled basins. In this paper, we present the first fault slip observations on the Neogene carbonate rocks that cover large areas of all three islands. Our main objective is to quantify the timing and nature of Neogene to Quaternary phases of faulting and folding that have affected the structure and topography of this area including offshore sedimentary basins that are being explored for their petroleum potential. These data constrain three fault phases that have affected Aruba, Bonaire, and Curaçao and likely the adjacent offshore areas: 1) NW-SE-directed late Paleogene compression; 2) middle Miocene syndepositional NNW-SSE to NNE-SSW extension that produced deep rift basins transverse to the east-west-trending Leeward Antilles ridge; and 3) Pliocene-Quaternary NNE-trending compression that produced NW-SE-trending anticlines present on Aruba, Curaçao and Bonaire islands. Our new observations - that include detailed relationships between striated fault planes, paleostress tensors, and bedding planes - show that prominent bedding dips of Neogene limestone on Aruba, Bonaire and Curaçao were produced by regional tectonic shortening across the entire Leeward Antilles ridge rather than by localized, syndepositional effects as proposed by previous workers. We interpret Pliocene-Quaternary NNE-directed shortening effects on the Leeward Antilles ridge as the result of northeastward extrusion or “tectonic escape” of continental areas of western Venezuela combined with southeastward shallow subduction of the Caribbean plate beneath the ridge.  相似文献